                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:3319062
40K Century Man - For Resin Printing by stewhead is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/

# Summary

UPDATE: JAN 5, 2019

I further upgraded the legs for this model - the original were great however the pistons on the heels are very fragile.  I upgraded them by adding wedges to give them more surface area.  I also integrated the leg armor plates and modded the back plate.

Original Designs by Garin, Plevragor and Wolverine_DH.

I really like the original model from Garin and the Remixes / "Part Packs" by Wolverine_DH and Plevragor. 

Why Did I do this?

I wanted something I could print easier on my Photon so I used parts from all the listed source material and cobbled some models for my display case.  They turned out great IMHO.  Looking forward to painting them up.  You can get the Armor Plates and helmets from the original creators.

I added markings for my own models but the files include only the Aquilla on the torso and waist plus Centurion Icon on the shoulder plate.  I upped the leg size to 105%. The ball join was added to give some flex in position and gives more contact area.  Also added a better contact area for the waist armor plate too.

Any similarities between this model and any real world product is purely coincidental. I am not affiliated with any gaming company or association in any way. Please support the official products as GeeDub has (IMO) the best sculpted models on the planet.

# Print Settings

Printer Brand: Anycubic
Printer: Photon
Rafts: No
Supports: Yes
Resolution: 35 micon
Infill: Solid

Notes: 
Used Anycubic Grey Resin

ALWAYS STIR YOUR RESIN - NEVER SHAKE!!  SHAKING = MILLIONS OF BUBBLES.  Take it from me...

Settings:
14s exposure
1s off
90s Bottom Layer
8 Layers for the bottom.

The model orientation is used I found worked best but feel free to set it up as you desire.



# Post-Printing

## Post-Printing

After printing - did a 3min dunk in my sonic cleaner filled with Methyl Hydrate - only clean for 3 mins max or resin will get too brittle in post cure. (Least that's what I experienced.)

After cleanup and letting the parts air dry - did 20min under my UV light.

Voila - 40K version of the Hulk Buster

# How I Designed This

## Overview

I used 3D Builder to add markings (grabbed jpgs, pngs from the web, and re-colored them in Photoshop) via EMBOSS in the program. 

It worked well for slapping parts together and making modifications etc.