                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:2784561
Hordeprince (28mm) by SebTheis is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
http://creativecommons.org/licenses/by-nc-sa/3.0/

# Summary

Hi !

An attempt to print a proxy for the space bugs horde prince !

May be difficult to print, in particular the swords. I'll probably post a version with thicker swords, easier to print with FDM.

Here is my printed version, with 2 scythes and 2 claws:
https://youtu.be/UivCSff2y0Y

Caution : use supports ( a lot) and print with fine resolution (0.1mm or less) or you won't get the details (teeth, fangs...)

Note: to assemble the legs, I recommend using a lighter and heat slightly one of the part in order to preform the contact area between parts. For example when assembling the upper legs on the tail, I heated the contact area on the upper leg and pressed it on the tail. This way the upper leg gets mould on the other part. Then you can glue. Same thing for all the other leg parts. 

*****Check our Patreon for more awesome designs*****
https://www.patreon.com/themakerscult

edit 13/02/2018 : downscaled all parts by 85% of the first version. scale should be OK with original model. I used kdesmo's torso to check the size. I added the base in the files (80mm diameter). added claws (remixed from kdesmo)
Edit 20/02/2018 : added Scythes, now you have a full set of arms. i'm working on a gun

Credits to tacihon for the original mesh.


edit 11/02/2018 : arms V2, with 40% thicker sword (should be easier to print)
Added R_wing (mirror the parts for the Left one) to con vert into hive tyrant. I'll have to add weapons later


== Please consider sending tips if you like my printable models ==

Copyright infringement is not intended. Parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way. These models are for personal use as proxies and should never be sold. If it causes copyright issues, i will remove it.