                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:3406031
Modular Terrain set (pipes and walkways) by ShoobieWoobie is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
http://creativecommons.org/licenses/by-nc-sa/3.0/

# Summary

Please leave any feedback you might have. I'd also love to see these in action, so if you've used the files please share some pictures! 

I've wanted to make a modular terrain set that went together with the Killzone Sector mechanicus. 

To save precious PLA i wanted to make the set compatible with 20mm VP-pipes. 

Suggestions on more parts are always welcome too!

I've been adding parts bit by bit an these are the parts I've made so far: 

What I built so far: 
* Feet
* T-cross
* +Cross
* Endpice
* Circular holders
* 90 degree turn.
* Ground End. 
* Single and Double walkways
* Rails
* Stairs for walkways
* Y connector
* 90 Degree walkways. 


What's on the to do list so far:

* 2 storey holder (two pipes on top of or beside each other for pipe walls)
* Ladders 
* Generator housing. 
* Parts for hexagonal walkway platforms. 

Disclaimer: All figures displayed are for scale purpuses only and have nothing to do with the actual 3d models. 


# Print Settings

Printer Brand: FlashForge
Printer: Finder
Rafts: No
Supports: No
Infill: 15%
Filament_brand: Flashforge 
Filament_color: Grey
Filament_material: PLA

Notes: 
Been using the standard print setting from the Flashprint. 

# How I Designed This

I've made all parts using Tinkercad. 

# Pictures of printed parts

![Alt text](https://cdn.thingiverse.com/assets/d9/96/67/54/08/F%C3%A4rdigt_r%C3%B6r.jpg)
Pipeholder, feet and endpieces attached to a 22mm pvc-pipe. 

![Alt text](https://cdn.thingiverse.com/assets/05/35/9e/32/38/F%C3%A4rdigt_r%C3%B6r_compare.jpg)
Comparison with Thermal Plasma Conduit.

![Alt text](https://cdn.thingiverse.com/assets/26/d8/24/04/08/rRailssneakypeaky_2.png)
Walkways with rails and stairs. (One walkway has been damaged with a plier for a more worn effect)

![Alt text](https://cdn.thingiverse.com/assets/0f/54/18/39/24/rRailssneakypeaky.png)
Closeup on walkways

# Tutorial for pipe meassuring tool

<iframe src="//player.vimeo.com/video/315464794" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>